"Laths" is a word in ENGLISH

v. /MANG-:-EN/ to weave (yarn, thread, fiber). Isu ti nangakilis diay sagut. It was he who wove the fiber. Narigat …

anamán - Lath, small board or slip of wood nailed to the rafters and supporting the roofing; a rib, purlin. …

A mandrel in lathe turning.

Pertaining to, or produced by, an automaton; of the nature of an automaton; self-acting or self-regulating under fixed conditions; -- …

baláyan - A large piece of wood, a rafter, especially the length of timber that rests on the wall and …

baníslak - (B) Splint, splinter, lath, split piece of wood, of bamboo, etc. See baníklan id.

A wooden vessel for the mortar used in tiling or masonry, hung by a hook from the laths, or from …

To inclose with boarding, lathing, etc., so as to bring to a required form.

A lathe tool for turning down the insides and bottoms of cylinders.

búyok - To bend, curve, incline, cause to lean; be prone to, have a—propensity for,— tendency towards,—leaning to,— proneness,—predisposition,—inclination,— bias,—bent,—set,—turn,—warp. …

An instrument, usually resembling a pair of dividers or compasses with curved legs, for measuring the diameter or thickness of …

That which drives or carries; as: (a) A piece which communicates to an object in a lathe the motion of …

One of the two conical steel pins, in a lathe, etc., upon which the work is held, and about which …

A conical recess, or indentation, in the end of a shaft or other work, to receive the point of a …

A tool with several points, used for cutting or finishing screw threads, either external or internal, on work revolving in …

A small tool used in cleaving laths.

A contrivance or machine fixed to the mandrel of a lathe, for holding a tool or the material to be …

A tool with teeth, used for chasing screws on work in a lathe; a chaser.

Having furrowed edges, as if turned in a lathe.

The framework in arched or coved ceilings to which the laths are nailed.